How to Install AirSonic on CentOS 7

Using a Different System?

  • How to Install AirSonic on Ubuntu 18.04 LTS

Are we missing a guide for your target system? Request one, or submit your own!

AirSonic is a free and open source media streaming server. In this tutorial, I will guide you through the process of deploying an AirSonic server instance from scratch on a CentOS 7 server instance.


  • A newly deployed Vultr CentOS 7 server instance with at least 2GB of memory. Say it has an IPv4 address
  • A sudo user.
  • A domain being pointed to the server instance mentioned above.

Step 1: Basic system configuration

Create a swap file

In order to get better system performance, it’s recommended to create a 2GB (2048M) swap file on a machine with 2GB of memory:

sudo dd if=/dev/zero of=/swapfile count=2048 bs=1Msudo chmod 600 /swapfilesudo mkswap /swapfilesudo swapon /swapfileecho '/swapfile   none    swap    sw    0   0' | sudo tee -a /etc/fstabfree -m

Note: If you are using a different server size, the suitable size of the swap partition may vary.

Setup the machine’s hostname and fully qualified domain name (FQDN)

Properly setting up a hostname and an FQDN for the machine is required for enabling HTTPS security with a Let’s Encrypt SSL certificate.

The following commands will setup a hostname airsonic and an FQDN for the machine:

sudo hostnamectl set-hostname airsoniccat <<EOF | sudo tee /etc/hosts127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4::1         localhost localhost.localdomain localhost6 localhost6.localdomain6203.0.113.1 airsonic127.0.0.1 airsonic::1       airsonicEOF

The results can be confirmed with the following:

hostnamehostname -f

Modify firewall rules in order to allow inbound HTTP and HTTPS traffic

Remove CentOS 7’s default block on ports 80 (HTTP) and 443 (HTTPS):

sudo firewall-cmd --permanent --add-service=httpsudo firewall-cmd --permanent --add-service=httpssudo systemctl reload firewalld.service

Install the repo

Install the EPEL YUM repo and then update the system:

sudo yum install -y epel-releasesudo yum -y update && sudo shutdown -r now

After the system reboots, log back in as the same sudo user to move on.

Step 2: Install OpenJDK Java Runtime Environment (JRE) 8

Install OpenJDK JRE 8 and then confirm the result on CentOS 7:

sudo yum install -y java-1.8.0-openjdk.x86_64java -version

The output of the second command will be similar to the following:

openjdk version "1.8.0_171"OpenJDK Runtime Environment (build 1.8.0_171-8u171-b11-0ubuntu0.18.04.1-b11)OpenJDK 64-Bit Server VM (build 25.171-b11, mixed mode)

In addition, you need to setup the JAVA_HOME environment variable as follows:

echo "JAVA_HOME=$(readlink -f /usr/bin/java | sed "s:bin/java::")" | sudo tee -a /etc/profilesource /etc/profile

Step 3: Install AirSonic

AirSonic can be deployed using various methods. In this tutorial, we will install AirSonic using the AirSonic WAR package.

Create a dedicated user and a dedicated group, both named airsonic:

sudo groupadd airsonicsudo mkdir /var/airsonicsudo useradd -s /bin/nologin -g airsonic -d /var/airsonic -M airsonic

Download the latest AirSonic WAR package:

cd /var/airsonicsudo wget chown -R airsonic:airsonic /var/airsonic

Download the predefined AirSonic systemd unit files and then start the AirSonic service:

sudo wget -O /etc/systemd/system/airsonic.servicesudo wget -O /etc/sysconfig/airsonicsudo systemctl daemon-reloadsudo systemctl start airsonic.servicesudo systemctl enable airsonic.service

Note: You may need to review and customize the two AirSonic systemd unit files on your own machine.

Step 4: Test the installation

AirSonic will be up and running now, listening on port 8080. You can use the following command to confirm that this is the case:

ps -ef|grep airsonic

You can also directly visit the AirSonic site, but you need to temporarily modify firewall rules first:

sudo firewall-cmd --permanent --add-port=8080/tcpsudo systemctl reload firewalld.service

Next, point your favorite web browser to, and then use the default credentials listed below to log in:

  • Username: admin
  • Password: admin

For security purposes, you should change the administrator’s password immediately after logging in.

Once the result is confirmed, restrict access on port 8080 again:

sudo firewall-cmd --permanent --remove-port=8080/tcpsudo systemctl reload firewalld.service

Step 5: Obtain a Let’s Encrypt SSL certificate for your AirSonic site

For security purposes, it’s recommended to enable HTTPS security on every newly created website. The most convenient practice for that is to deploy a Let’s Encrypt SSL certificate as follows.

Install the Certbot utility on CentOS 7:

sudo yum -y install yum-utilssudo yum-config-manager --enable rhui-REGION-rhel-server-extras rhui-REGION-rhel-server-optionalsudo yum install -y certbot

Use Certbot to apply for a Let’s Encrypt SSL certificate for the domain

sudo certbot certonly --standalone --agree-tos --no-eff-email -m -d

The certificate and chain will be saved at the following:


The key file will be saved here:


The Let’s Encrypt SSL certificate is designed to expire in three months. You can setup a cron job to renew your certificates automatically:

sudo crontab -e

Press I, and then input the following entry:

0 0,12 * * * python -c 'import random; import time; time.sleep(random.random() * 3600)' && certbot renew

Save and quit:


This cron job will attempt to update the Let’s Encrypt certificate every day at noon.

Step 6: Install Nginx as a reverse proxy

With the help of Nginx, you can both facilitate visitors’ access (so that they no longer need to input the 8080 port number), and enable HTTPS security on your AirSonic website.

Install Nginx using YUM:

sudo yum install -y nginx

Next, create a config file for AirSonic:

cat <<EOF | sudo tee /etc/nginx/conf.d/airsonic.conf# Redirect HTTP to HTTPSserver {    listen      80;    server_name;    return      301 https:///$server_name/$request_uri;}server {    # Setup HTTPS certificates    listen       443 default ssl;    server_name;    ssl_certificate      /etc/letsencrypt/live/;    ssl_certificate_key  /etc/letsencrypt/live/;    # Proxy to the Airsonic server    location /airsonic {        proxy_set_header X-Real-IP         /$remote_addr;        proxy_set_header X-Forwarded-For   /$proxy_add_x_forwarded_for;        proxy_set_header X-Forwarded-Proto https;        proxy_set_header X-Forwarded-Host  /$http_host;        proxy_set_header Host              /$http_host;        proxy_max_temp_file_size           0;        proxy_pass               ;        proxy_redirect                     http:// https://;    }}EOF

Restart Nginx in order to put your configuration into effect:

sudo systemctl restart nginx.servicesudo systemctl enable nginx.service

Finally, point your favorite web browser to or to start exploring your AirSonic website.

Want to contribute?

You could earn up to $300 by adding new articles

Submit your article
Suggest an update
Request an article

No comments

Powered by Blogger.