Installing pfSense on a Vultr Cloud Server

pfSense is an ideal tool for system administrators who are looking to add a broad range of features to their network. It is primarily an open-source router/firewall suite built on top of FreeBSD, but it also supports setting up a VPN or load balancer with just a few clicks. In this guide, we’ll be looking at installing pfSense on a Vultr cloud server. I recommend a plan with at least 1 GB of RAM, however if you are on a budget, with some tweaking, a 512 MB plan might end up functioning as well.

Deploying pfSense

Step 1: Uploading pfSense to Vultr

Vultr has pfSense available in its ISO Library, which can be chosen at the time of deployment. If you would like to use a different version of pfSense, you will need to upload the pfSense ISO file to Vultr before continuing. To upload an ISO, navigate to My Vultr, click “ISO” in the top bar, then click “Add ISO”. Now enter the URL to your pfSense ISO. Wait for the ISO to be uploaded.

Step 2: Deploying a pfSense server

Navigate to My Vultr, click “Deploy New Server”. Walkthrough the process like usual, but for “Server Type”, select “Custom ISO” or “ISO Library”. Deploy a new server. Wait for the server to become available.

Installing pfSense

Step 1

Open the console for your server in My Vultr. Here you will see the progress for the pfSense installation. Because Vultr works with SSD drives, the installation will be relatively fast and you will see the following screen after some time:

Installing pfSense on a Vultr Cloud Server

We want to use the standard option “Quick/Easy Install”. As this has already been selected, simply press Enter. If pfSense asks for a confirmation, press Enter again. Then you will need to select the kernel to use.

Installing pfSense on a Vultr Cloud Server

If you are unsure as to which kernel you should use, I recommend making use of the default kernel version.

After some time, pfSense will automatically reboot. This is somewhat confusing as after the restart, pfSense will start in the start screen which makes it look like you have to walk through the entire process again. However this is not necessary, navigate to “Reboot” with your arrow keys.

Installing pfSense on a Vultr Cloud Server

one thing to keep in mind is you must unmount the Custom ISO after the initial installation is complete so the instance can boot normally; otherwise, the instance will continuously enter the installation after each reboot:

  1. Visit your Vultr management page.
  2. Select the instance.
  3. Choose the “Settings” link near the top of the page.
  4. Click the “Custom ISO” link on the side.
  5. Select the ‘Remove ISO’ button.

Step 2

The installation will now proceed in the console. Please match the questions with the appropriate letters as seen below.

Should VLANs be set up now? nEnter the WAN interface or "a" for auto-detection: vtnet0, press enterEnter the LAN interface name or "a" for auto-detection: press enterDo you want to proceed? y

You have now walked through the first part of pfSense’s configuration. The actual configuration will be setup through the built-in webConfigurator. This is a web interface used for administrating pfSense and accessing its tools. In order to use this tool, please navigate to the IP address of your Vultr server. You can find this IP address on the Vultr control panel.

Upon navigating to the webConfigurator, you will see an SSL error. You can safely ignore this and proceed. The default user name is admin and the default password is pfsense. Enter this is in the login form and login.

Step 3

Click “Next” to start the installation. I will guide you through this process step-by-step.

General Information

  • Hostname: Do not enter an FQDN, but a general description such as “loadbalancer”.
  • Domain: Enter a domain name for your pfSense install.
  • Primary & Secondary DNS server: If you are unsure as to which DNS server you should use, please use (Google DNS).
  • Override DNS: yes.

Installing pfSense on a Vultr Cloud Server

Time Server Information

pfSense uses a time server to determine the time. Leave this on the default setting. (Time server hostname:

Configure WAN Interface

  • SelectedType: DHCP.

General configuration

  • MAC Address: leave empty.
  • MTU: leave empty.
  • MSS: leave empty.

DHCP client configuration

Type the same domain name as you did at “General Information”.

Installing pfSense on a Vultr Cloud ServerInstalling pfSense on a Vultr Cloud Server

Set Admin WebGUI Password

Make sure to enter a strong password. This password will be used to access the pfSense web GUI.

Click “Click here to continue on to pfSense webConfigurator” to configure pfSense.

Slow connectivity

If for some reason you experience slow connectivity to your pfSense when downloading, go into System > Advanced > Networking, and disable the following features:

  • Hardware Checksum Offloading
  • Hardware TCP Segmentation Offloading


The pfSense setup is complete. Congratulations, you are now able to use pfSense to its fullest extent on Vultr!

Want to contribute?

You could earn up to $300 by adding new articles

Submit your article
Suggest an update
Request an article

No comments

Powered by Blogger.